FX Rail-Less Installation

FX SYSTEM INSTALLATION MANUAL - 4© 2018 IRONRIDGE, INC. VERSION 1.50
FX SYSTEM COMPONENTS
MOUNT FX
Mount FX is uniquely designed to securely grip PV
modules and secure them in place. The base of the Mount
FX assembly allows for 360 degree articulation. This
provides North-South exibility and also helps to avoid
conict with the Bridge FX. A built-in wire management
trough and integrated bonding features allow for a fully-
bonded solution and seamless, rapid installation. For the
rst row of an array, Mount FX is always oriented with the
wire management trough positioned towards the north end
of an array.
FLASH FX
Flash FX provides for a secure connection between Mount
FX and composition shingle roofs while maintaining a
water-tight seal at 7/8” above the roof deck.
1. Hanger Bolt
2. EPDM/ Stainless Steel Sealing Washer
FLAT & S TILE FX
Flat and S Tile FX provide a secure connection between
Mount FX and at or s-tile roofs.
BRIDGE FX
The Bridge FX supports and connects modules together.
The integrated bonding features and built-in wire
management trough allow for a fully bonded solution
and a seamless installation. The Bridge FX also features a
1/2" spacer to aid in module spacing.
1. Wire Management Clip
2. Module Spacer
NORTH BRIDGE SCREW
North Bridge Thumb Screws are used to lock Bridge FX
assemblies to the modules on the north edge
(northernmost row) of the array for additional rigidity and
support over the life of the system.
Mount FX
Flash FX
Bridge FX
North Bridge Screw
Flat & S Tile FX