Install Manual
Table Of Contents
GROUND MOUNT INSTALLATION MANUAL - 3© 2021 IRONRIDGE, INC. VERSION 3.1
CHECKLIST
IRONRIDGE COMPONENTSPRE-INSTALLATION
☐ Verify module compatibility. See 4 for info.
☐ Purchase 2” or 3” Pipe or Mechanical Tubing
Pipe: 2” or 3” (NPS) ASTM A53 Grade B SCH 40 Pipe,
G35.
Mechanical Tubing:3.500” x
8 ga (O.D.) Mechanical Tubing with one of the following
• Allied Gatorshield
• Allied Flo-Coat Coating
• Wheatland ThunderCoat
TOOLS REQUIRED
☐ Post Hole Digger or Powered Auger
☐
☐
☐
☐
TORQUE VALUES
☐ 2” or 3” NPS Schedule 40 Grade B Pipe: 20 ft-lbs
☐
☐ 3.500” x
☐ For Ground Screw to Pipe Connection Hardware see Page
5.
☐
☐
☐
☐
☐
Socket): 20 in-lbs
☐
☐
Socket): 20 in-lbs
☐
☐
☐
☐
☐
➢ If using previous version of: Integrated Grounding Mid Clamps,
Grounding Lug and End Clamps please refer to Alternate
Components Addendum (Version 1.80).
➢ If installing on a low slope roof please refer to Ground Mount for
Flat Roof Applications Addendum (Version 2.80).
➢ Unless otherwise noted, all components have been evaluated for
multiple use. They can be uninstalled and reinstalled in the same
or new location.
Rail Connector
Top Cap UFO
Diagonal Brace
Stopper Sleeve
Rail Grounding
Microinverter Kit
Frameless Module
Kit
Frameless End/
Mid Clamp
CAMO
End Cap Wire Clip
Module Grounding
Hex Head Set
Screw