QRail Tilt System Supplemental Instructions RESPECT THE ROOF BI 7.2.
QRail Tilt System Installation Instructions Installation Tools Required: drill, impact gun with bits appropriate to selected fasteners, tube of sealant compatible with roofing materials, pencil, chalk line, tape measure QBase Deck Mounts (QMQDM) are to be installed at the appropriate spacing between low edge and raised edge. Refer to Mounting Tables below.
Mounting Tables & Diagrams Consult the Mounting Tables and diagrams below or download them off our website to determine proper QBase Deck Mount heights and mount spacing. Mounting Tables and diagrams assume the following: • Cantilever is assumed to be equivalent on both sides of the module.
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT RAISED EDGE HEIGHT ABOVE ROOF QMC-LF10 (10 DEGREE L-FOOT) QRAIL QMQDM-XXX (RAISED EDGE MOUNT) QMQDM-3.75 (LOW EDGE MOUNT) SPACING QRAIL TILT: QMQDM-3.75 LOW EDGE MOUNT WITH 10 DEGREE TILT PORTRAIT VARIABLES LANDSCAPE 60 CELL 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-3.75 QMQDM-3.75 QMQDM-3.
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF QRAIL QMQDM-5 (LOW EDGE MOUNT) RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT QMC-LF5 (5 DEGREE L-FOOT) RAISED EDGE HEIGHT ABOVE ROOF QMQDM-XXX (RAISED EDGE MOUNT) SPACING QRAIL TILT: QMQDM-5 LOW EDGE MOUNT WITH 5 DEGREE TILT PORTRAIT VARIABLES LANDSCAPE 60 CELL 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-5 QMQDM-5 QMQDM-5 RAISED EDGE MOUNT QMQDM-9 QMQDM-9 QMQD
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT RAISED EDGE HEIGHT ABOVE ROOF QMC-LF10 (10 DEGREE L-FOOT) QRAIL QMQDM-5 (LOW EDGE MOUNT) QMQDM-XXX (RAISED EDGE MOUNT) SPACING QRAIL TILT: QMQDM-5 LOW EDGE MOUNT WITH 10 DEGREE TILT PORTRAIT VARIABLES 60 CELL LANDSCAPE 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-5 QMQDM-5 QMQDM-5 RAISED EDGE MOUNT QMQDM-13 QMQDM-13 Q
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT RAISED EDGE HEIGHT ABOVE ROOF QMC-LF5 (5 DEGREE L-FOOT) QRAIL QMQDM-7 (LOW EDGE MOUNT) QMQDM-XXX (RAISED EDGE MOUNT) SPACING QRAIL TILT: QMQDM-7 LOW EDGE MOUNT WITH 5 DEGREE TILT PORTRAIT VARIABLES LANDSCAPE 60 CELL 72 CELL LOW EDGE MOUNT QMQDM-7 QMQDM-7 60 & 72 CELL QMQDM-7 RAISED EDGE MOUNT QMQDM-11 QMQDM-11 Q
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT RAISED EDGE HEIGHT ABOVE ROOF QMC-LF10 (10 DEGREE L-FOOT) QRAIL QMQDM-XXX (RAISED EDGE MOUNT) QMQDM-7 (LOW EDGE MOUNT) SPACING QRAIL TILT: QMQDM-7 LOW EDGE MOUNT WITH 10 DEGREE TILT PORTRAIT VARIABLES 60 CELL LANDSCAPE 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-7 QMQDM-7 QMQDM-7 RAISED EDGE MOUNT QMQDM-15 QMQDM-15 Q
PANEL CLAMP MODULE MODULE CANTILEVER LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT RAISED EDGE HEIGHT ABOVE ROOF QMC-LF5 (5 DEGREE L-FOOT) QRAIL QMQDM-XXX (RAISED EDGE MOUNT) QMQDM-9 (LOW EDGE MOUNT) SPACING QRAIL TILT: QMQDM-9 LOW EDGE MOUNT WITH 5 DEGREE TILT PORTRAIT VARIABLES 60 CELL LANDSCAPE 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-9 QMQDM-9 QMQDM-9 RAISED EDGE MOUNT QMQDM-13 QMQDM-13
PANEL CLAMP MODULE MODULE CANTILEVER RAISE EDGE RAIL OFFSET FROM CENTER OF VERTICAL ADJUSTMENT LOW EDGE RAIL MOUNTED IN CENTER OF VERTICAL ADJUSTMENT LOW EDGE HEIGHT ABOVE ROOF RAISED EDGE HEIGHT ABOVE ROOF QMC-LF10 (10 DEGREE L-FOOT) QRAIL QMQDM-XXX (RAISED EDGE MOUNT) QMQDM-9 (LOW EDGE MOUNT) SPACING QRAIL TILT: QMQDM-9 LOW EDGE MOUNT WITH 10 DEGREE TILT PORTRAIT VARIABLES 60 CELL LANDSCAPE 72 CELL 60 & 72 CELL LOW EDGE MOUNT QMQDM-9 QMQDM-9 QMQDM-9 RAISED EDGE MOUNT QMQDM-17 QMQDM-17
L-Foot Tilt Line Drawing ITEM NO. 1 DESCRIPTION QTY. L-FOOT, 5 DEGREE TILT, 2" X 3.283", .440" HOLE, 2-1/16" SLOT, AL, MILL 1 DIMENSION A B 1 QMC-LF5 3.28 5° QMC-LF10 3.24 10° .408 .440 .800 2.085 A 2.000 B TILT ANGLE QDECK MOUNT NOT INCLUDED 1.
QBase Deck Mount Line Drawing 4X 4 .32 THRU 4.00 5 2.50 1 AVAILABLE IN THE FOLLOWING SIZES: 3.75", 5", 6.25", 7", 7.5", 7.75", 8.75", 9", 9.5", 10" 11", 11.5", 12", 13", 14", 15", 17" 2.50 2 1.25 1 3.75 1 .50 1.50 3 ITEM NO. DESCRIPTION QTY.
