Tile Replacement Flashing For Tile Hooks For use with Flat, S, & W shaped tiles Installation Instructions
BI 7.2.
Instructions: QMTRF - Tile Replacement Flashing Installation Tools Required: tape measure, aviation type tin snips, chalk or crayon, roofing bar. NOTE: Installation method is the same for all tile replacement flashing profiles. 1 2 Remove a tile and install the tile hook of your choice to a rafter. Properly flash the hook using prefered method. Prop up adjacent tiles to the side and above using roofing bars.
BI 7.2.3-45 2 Jul-2017, Rev 1 1.42 18.76 17.00 5 WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED. 4 COPYRIGHT © 2016 QUICK MOUNT PV PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE MATERIAL THICKNESS .032 14.12 14.01 3 THIS EDGE TOWARDS ROOF RIDGE DO NOT SCALE DRAWING 1 2 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/8 TWO PLACE DECIMAL .19 THREE PLACE DECIMAL .
BI 7.2.3-45 3 Jul-2017, Rev 1 2.46 17.00 18.44 5 WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED. 4 COPYRIGHT © 2016 QUICK MOUNT PV 3 1 DO NOT SCALE DRAWING THIS EDGE TOWARDS ROOF RIDGE PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE MATERIAL THICKNESS .032 13.69 13.
BI 7.2.3-45 4 Jul-2017, Rev 1 1.37 17.00 3.54 18.51 5 WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED. 4 COPYRIGHT © 2016 QUICK MOUNT PV PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE MATERIAL THICKNESS .032 12.70 11.17 3 1 DO NOT SCALE DRAWING THIS EDGE TOWARDS ROOF RIDGE QTY.
BI 7.2.
925-478-8269 | www.quickmountpv.com | tech@quickmountpv.com 2700 Mitchell Dr. | Walnut Creek, CA 94598 BI 7.2.3-45 Jul-2017, Rev 1 ©2017 by Quick Mount PV. All rights reserved.
