Install Manual

VERSION 1.7© 2020 IRONRIDGE, INC.
IRONRIDGE ALTERNATE COMPONENTS ADDENDUM
The following components have been tested or evaluated with IronRidge's Flush Mount, Tilt Mount and Ground
Mount systems. The ratings described in each product installation manual apply when using these alternate
components.
End Clamp Mid Clamp
Expansion Joint Grounding Lug
TORQUE VALUES
☐ End Clamp Nuts (1/4"-20): 80 in-lbs
☐ Mid Clamp Nuts (1/4"-20): 80 in-lbs
☐ (55 in-lbs for SunPower Modules)
☐ Grounding Lug Nuts (1/4"-20): 80 in-lbs
☐ Grounding Lug Set Screws (1/4"-28): 20 in-lbs
Follow the same installation steps described in the respective component section of the Flush Mount, Tilt Mount, and
Ground Mount installation manuals.
The components referenced in this addendum conform to STD UL 2703 (2015) Standard for Safety First Edition: Mounting
Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules
and Panels.
Assemble as Shown
FlashFoot