Manualshelf

Product Manual

ManualsBrandsIronton Manuals5,000 - 7,900 Lb. Capacity Winches12 Volt DC Powered Electric Marine Winch — 5,000-Lb. Capacity, Galvanized Wire Rope
12345678910
Page 8 of 18
2. Align the base of the winch with the desired location, and mark for drilling the three mounting
holes required to attach the winch to the desired location. Then, drill these three mounting holes
on the vehicle/trailer. See Figure A.
3. Use three hardened steel bolts at least 3/8in. in diameter, three lock washers and three nuts (not
all included), to securely attach the winch to the desired location. See Figure A.
Temporary Mounting of the Winch:
1. Insert three screws (#74) into the three mounting holes in the adapter plate, and secure the
screws to the adapter plate, using three washers (#76), and three nuts (#77). See Figure B.
2. Insert the heads of the three screws (#75) to the vehicle’s hitch ball (not included) by inserting the
hitch ball through the tear drop shaped hole in the adapter plate. See Figure B.
3. Attach the winch with its plate (#75) to the vehicle’s hitch ball (not included) by inserting the hitch
ball through the tear drop shaped hole in the adapter plate.