Cord Reels With Work Lights Owner’s Manual 49667 49669 49670 WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Serial Number/LotDate Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. These Cord Reels are designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Considerations ........................................................................................................ 5 Grounding .............................................
Intended Use These cord reels include a working light with a 125V outlet and hooks to hang the light leaving both hands free. The auto-retractable feature makes them easy to keep the cord organized and the wall or ceiling mounting and the swivel design offer greater usability reducing tool cord tangles during use. Technical Specifications 49667, 33’ Cord Reel Property Specification Length (ft.) 33 Cord Size 16/3 Lead-in Cord Length (ft.) 4-1/2 Voltage 125 VAC Amps 10 Outlets (qty.
Important Safety Considerations Read and understand all instructions. Failure to follow all instructions may result in serious injury. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner.
Specific Operation Warnings Exercise care when handling the cable reel during normal operation. Cord reels have a rotating drum powered by a spring under tension. Do not use cord different than what is supplied with this reel. Changes in diameter, weight per foot, length of cord or flexibility will affect the operation of the reel. Mounting hardware and fasteners should be installed to maintain tightness under vibration and checked periodically to ensure tightness.
Assembly – 49667 This cord reel is intended for industrial use and is provided with permanent mounting means. This equipment should be properly installed before use in accordance with local codes and ordinances. Only qualified personnel should undertake the installation and commissioning of this product. Failure to comply with instructions could result in personal injury and/or property damage. 1. Select an indoor wall or ceiling location within 4 feet of an electrical outlet.
Assembly – 49669 & 49670 This cord reel is intended for industrial use and is provided with permanent mounting means. This equipment should be properly installed before use in accordance with local codes and ordinances. Only qualified personnel should undertake the installation and commissioning of this product. Failure to comply with instructions could result in personal injury and/or property damage. Do not disassemble a spring assembly for any reason! Serious personal injury could result.
Before Each Use Check for damaged reel parts and for frayed, worn, or lacerated power cord before each use. Carefully check that the reel will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the reel with a damaged part. Operating Instructions Do not use the reel where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
To unlatch, slowly pull out the cord until the “clicking” noise stops then, holding on to the cord, let it retract in a controlled way until the cord stopper rests against the cord guide. Note: To avoid possible injury and damage to the reel, always hold on to the cord while it is rewinding. Work Light Operation The hook at the top of the light allows hanging the light leaving both hands free.
After Each Use Inspect the reel casing, mounting parts, and cord periodically after use so that worn or damaged parts can be ordered and replaced before the next use. Have damaged or worn parts repaired or replaced by an authorized service technician. DO NOT Open the casing for any reason! The spring inside can be under high tension and accidental release can cause severe personal injury. Maintenance Only properly trained persons should open a reel case.
Parts Diagram - 49667 Parts List Part No.
Parts Diagram - 49669 Parts List Part No.
Parts Diagram - 49670 Parts List Part No.
Troubleshooting Problem(s) Solution(s) Cable will not fully retract. Call an authorized technician for service to add tension to the reel’s internal spring. Cable will not retract at all. Call an authorized technician for service. Check all connections ensuring they are properly wired. No electrical power at output end of cable. (49667) Press the reset button on the side of the reel case. (49669) Replace the circuit breaker in the lead-in cord.
Limited Warranty Northern Tool and Equipment Company warrants this Fluorescent Work Light with Cord Reel, components and parts, unless otherwise specified, under normal use and service for a period of one year. Northern Tool and Equipment Company reserves the right to substitute an equivalent model Wheeled Sprinkler Cart (or parts) in the event this specific model (or part) is no longer available.
Distributed by: Northern Tool & Equipment Co., Inc. Burnsville, Minnesota 55306 www.northerntool.