Product Manual A
Table Of Contents
Page 6 of 13
Inspect the tool for good working condition prior to storage and before re-use.
• Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
• Keep guards in place and in working order. Never operate the product without the guards in place.
• Do not leave the tool running unattended.
Specific Operation Warnings
⚠
WARNING
• To prevent serious injury or property damage, read and understand this manual before operating.
• To reduce the risk of injury, operate hoist using manual power only.
• Do not exceed the rated load capacity.
• Do not use hoist with extension on lever handle.
• Do not use in a way that causes either hook to be side loaded.
• Do not use chain hoist as a sling.
• Do not support load on hook unless hook is designed for tip loading.
• Do not operate if restricted from forming a straight line from hook to hook in the direction of
loading.
• Inspect for damaged parts before use. Do not use if damaged.
• Examine each chain link for damage or weak links before use. Do not operate a hoist with twisted,
kinked or damaged chain.
• Do not lift people, animals, or loads above either.
• Do not pull chain at an angle.
• Keep bystanders away while hoist is loaded.
• Not for use by or around children.
Before Each Use
⚠
WARNING
• Before operating, make sure that the hoist is not in the free chain mode and always check that the
selector is placed in the proper position.
• DO NOT touch or operate the hoist’s free knob while a load is applied to the hoist.
• Inspect for damaged parts before use. Do not use if damaged.
• Examine each chain link for damage or weak links before use. Do not operate a hoist with twisted,
kinked or damaged chain.