Product Manual A

Page 9 of 13
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval Maintenance Point
Daily after operating
Clean the chain block from dirt and keep it in a dry place away
from dust and corrosion.
Quarterly (every 3 months)
Clean off load chain, and then lubricate load chain links with
lithium grease. Apply grease to inner surfaces of load chain,
where the links rub against each other.
Parts Diagram