Manualshelf

Product Manual

ManualsBrandsIronton ManualsCircular Saws7 1/4in. Circular Saw — 13 Amp, 110 Volt
12345678910
Page 4 of 18
Intended Use
The Ironton 7¼ Inch Circular Saw is a powerful 13 amp circular saw that has all the features and
versatility you need to comfortably and accurately tackle the toughest wood cutting jobs. It has a laser
cutting guide and rip guide for quicker set-up and improved accuracy. You can make rip cuts, bevel
cuts, and compound cuts in a variety of woods and wood composites. It features a built-in laser
cutting guide for accuracy.
Technical Specifications
Property
Motor
Speed
Blade Diameter
Arbor Size
Cutting Capacity at 90°
Cutting Capacity at 45°
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to cutting tools and rotating parts.
Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence