Product Manual

Page 6 of 18
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the saw when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the saw running unattended.
 Leaving blade exposed is VERY DANGEROUS and can lead to serious personal injury.
Specific Operation Warnings
⚠DANGER
 Keep hands and body away from and to the side of the blade. Contact with blade will result in
serious injury.
⚠WARNING
 To reduce the risk of injury, user must read instruction manual.
 To reduce the risk of injury, check guarding system. It must cover the blade instantly!
 Hold saw with both hands.
 Support and clamp work.
 To reduce the risk of injury always wear eye protection
 Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
 Always use blades with correct size and shape.
 Never attempt to remove the saw from the work or pull the saw backward while the blade is in
motion or KICKBACK may occur.
 Do not use dull or damaged blades.
 Never stop the saw blade by applying pressure to the saw or to the side of the blade.
 Never lock the blade guard in its open position.
Grounding
⚠WARNING
 This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed