Product Manual

Page 9 of 18
Main Parts of Saw
Subassembly
Switch
Up Guard
Lower Guard
Assist Handle
Laser
Base
Ruler
Assembly Instructions
⚠WARNING
 Always be sure that the saw is switched OFF before adjusting, adding accessories, or checking a
function on the saw.
 7-1/4'' is the maximum blade capacity of your saw. Never use a blade that is too thick to allow the
outer flange washer to fit properly on the spindle.
Changing the Blade (Figure 1)
1. Unplug the circular saw.
2. Press the spindle-lock button, place the blade wrench on the blade screw, and move it back and
forth until you feel the spindle-lock button depress further. This action locks the blade in position
so that the blade screw can be removed.
3. With the spindle-lock button firmly pressed, turn the blade screw counter-clockwise to loosen it.