Product Manual
Page 6 of 11
position before making any adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool accidentally.
• Store the actuator when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
• Use only accessories that are recommended by the manufacturer for use with your linear actuator.
Accessories that may be suitable for one linear actuator may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
• To prevent serious injury or property damage, read and understand the owner’s manual before
operating.
• Do not exceed the rated load capacity of 1,300 lbs.
• Test battery before operation to make sure the battery has adequate power to lift the linear actuator.
• Switch off the power before changing the direction. If you change the direction when the motor is
running, the motor may be damaged.
• If the linear actuator is connected to the power source incorrectly, it may run exceeding its stroke,
and may run in wrong direction.
• Do not open actuator manually. This can cause damage to the actuator.
Main Parts of Actuator