Product Manual

9
FEATURES AND SPECIFICATIONS (continued)
SETUP
BUILT TO GET THE JOB DONE
Connect the earth lead to the output terminal of the machine and tighten.
Connect the air supply to the air connection located at the rear of the machine.
Turn on the air supply
located at the rear of the machine.
Set amperage dial.
SPECIFICATIONS
Voltage Rating
Amperage Rating
Frequency Rating
Phase
Input Rating
Power Rating
Cutting Capacity
Cutting Speed
Air Consumption
Pressure Rating
Connection Type
Cord Length
Dimensions
Working Temperature
Cooling System
Insulation
Enclosure Class
115/230V AC
20/30A
60Hz
Single
5.5-230V KVA
3.9 to 4.6 KVA (115/230V)
Clean Cut: 1/4 in., Sever Cut: 1/2 in.
Mild Steel: 18 in. per minute
6 CFM at 75 PSI
65 to 75 PSI
Direct connection
12 ft
17-3/4 x 12 x 6-1/2 in.
-14 to 104°F (-25 to 40°C)
Forced Air
Class B
IP21S