Product Manual

Page 11 of 18
15. Reassemble bolt D on the stand and fully tighten using an adjustable wrench (not included)
(image 17).
Before Each Use
⚠WARNING
 Check for loose or damaged parts and replace as needed. Make sure the holder is in good
working condition.
Operating Instructions
⚠WARNING
 Always unplug grinder before loosening and repositioning the grinder blade guard or when making
other adjustments.
 Only use on flat, level surfaces.
 Bolt down the stand before installing the grinder.
 Ensure the grinder is secure before each use.
 Make sure the item to be ground and the angle grinder are both attached to the holder.