Product Manual

Operation – Using the Sprayer (continued)
27
3. Flush sprayer
Flush the sprayer per the chemical manufacturer’s recommendations.
A general procedure is as follows:
a) Add fresh water to the tank.
b) Reconnect power to the sprayer.
c) Operate the spray gun and discharge all rinse water onto an area that
can accept dilute pesticide application.
d) Add 5 gallons of the chemical manufacturer’s recommended cleaning
solution. Operate the spray gun, collecting the discharged solution if
recommended by the manufacturer.
e) After flushing, disconnect power to the sprayer and be sure all system
pressure is relieved by squeezing the gun trigger.
f) Dispose of cleaning solution discharge as recommended by the
manufacturer of the solution.
4. Decontaminate
& launder
Decontaminate yourself after you are finished handling chemicals:
a) Remove all clothing worn during spraying and chemical handling.
b) Wash all exposed parts of the body with soap and water.
c) Launder clothing separately from other wash.