3/8in. x 50ft. Auto Rewind Air Hose Reel Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air hose reel is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Ironton 3/8in. x 50ft. Auto Rewind Air Hose Reel includes the hose with a maximum 300 PSI working pressure, automatic rewind, and easy installation on a wall, floor, or ceiling. The reels feature an adjustable guide arm that allows for a variety of mounting orientations (hardware not included). Technical Specifications Property Max. PSI Hose Length (ft.) Hose Outlet Size (in. NPT) Hose Material Max. Hose Temp Range (°F) Min. Hose Temp Range (°F) Reel Inlet Size (in.
product will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
⚠CAUTION HOSE REEL USE AND CARE Do not force the hose reel. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Do not use a product with a malfunctioning switch.
Bleed fluid/gas pressure from reel before servicing it. Use soap and water when checking for air leaks. Exposure of skin directly to pressurized air or fluids could result in severe bodily injury. Remember, even low pressure is very dangerous and can cause personal injury or death. Mounting Instructions ⚠WARNING To avoid a dangerous sudden release of pressure that can cause severe injury, ensure that the pressure source for the reel is turned off and the supply hose is not pressurized. 1.
Operating Instructions ⚠WARNING Wear ANSI Z87.1 compliant safety goggles or safety glasses with side shields when assembling and using the hose reel. Do not exceed the max working pressure of 300 PSI. Never attach any tool or accessory to the hose unless it is capable of safely operating at a pressure greater than the supply pressure. If a leak occurs in the hose or reel, remove system pressure immediately. If reel ceases to unwind or rewind, remove system pressure immediately.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure The spring doesn’t work well. Possible Cause The spring tension needs to be adjusted. Corrective Action Pull the hose from the reel and latch it at the desired length. Loosen the stopper bolts and slide the stopper to a position close to the hose guide.
Parts Diagram Page 10 of 13
Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Part Description Hose Assembly O-ring Ratchet Paw Ratchet Screws Support Cover O-ring Spool Drum Fixed Pin Base Hose Compositor Assembly Screws Screws Label Pre Tightening Cover Right Casing Baffle Synchronous Belt Synchronous Wheel Screws Spring Hose Assembly Guide Bar Reduction Assembly Spring Gasket Left Shell Fixed Film Hose Clamp Screws Side Cover Quantity 1 2 1 1 9 1 2 1 2 2 1 1 8 11 2 1 1 1
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.