2-Pack Indoor/Outdoor Simulated Security Cameras Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. The 2-Pack Indoor/Outdoor Simulated Security Cameras are designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Operating Instructions ............................
Intended Use The 2-Pack Indoor/Outdoor Simulated Security Cameras help give the impression of an on-site security presence without the elaborate cost. The decoy cameras look like a real security camera, complete with a blinking red LED. Technical Specifications Property Bracket Arm Movement Camera Lens Diameter Power Source Camera Dimensions Specification Fully Adjustable (0-180°up and down tilt, 0-360°L/R rotation) 0.25 inch 2AA size batteries (not included) 7.
- arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
⚠CAUTION CAMERA USE AND CARE Do not force the cameras. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct products for the job. Check for damaged parts before each use. Carefully check that the cameras will operate properly and perform the intended functions. Replace damaged or worn parts immediately. Never operate the cameras with damaged parts. Do not use a camera with a malfunctioning switch.
Parts Diagram Parts List Part Number 1 2 3 4 5 6 7 8 9 Description waterproof cover bottom cover battery cover back cover dummy cable bracket front cover flashing LED light top cover Page 7 of 10 Quantity 1 1 1 1 1 1 1 1
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
