Garden Hose Reel with 5/8In. x 50Ft. Hose Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hose reel is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton Garden Hose Reel with 5/8In. x 50Ft. Hose is ideal for water applications. It has a hose guide system, speed control device, and durable construction. It can be used for gardens, schools, car-repair, hospitals, and mining. Packaging Contents Reel Hose Owner’s Manual Technical Specifications Max. Pressure Application Material Working Temperature Hose I.D. Hose Length 90 PSI Water PVC 0-140° F 5/8in. 50ft.
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area.
Specific Operation Warnings ⚠WARNING Do not exceed the rated pressure of 90 PSI. Do not point nozzle at people or animals. Always hold on to the hose while rewinding to prevent the hose whipping. Not for use by or around children.
4) The end of the incoming hose can be connected to a desired supply source. 5) Outlet fittings on the reel hose attach to a desired tool or nozzle. Check the connection for leakage; also check the hose reel for correct operation. See the operation section. 6) If the hose stopper adjustment is required, pull the hose from the reel and allow it to latch at the desired length. Loosen the stopper bolts and slide the stopper to a position close to the hose guide. Tighten the stopper bolts and unlatch the reel.
After Each Use ⚠WARNING Always hold on to the hose while rewinding to prevent the hose whipping. Be sure the hose reel is clean, dry, and stored in a safe place. To avoid injury, do not allow children to play with the hose reel. Maintenance Make sure the hose is in proper working order. Clean the hose with a cloth dipped in warm water to remove dirt or deposits and ensure correct rewinding. Do not use detergents or solvents which could prove incompatible with cable-winder materials.
Parts Diagram Parts List Part# 1-1 1-2 1-3 1-4 1-5 1-6 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Small Gear Roller Frame B Moving Unit Roller Roller Frame B Taxis Axle Right Casing Left Casing End Cover Handle Screw Hose Assembly Base Screw Main shaft Bumper Block Hose Assembly Spring Clamp Hose Clamp Qty.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.