500 Watt Halogen Worklight Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Ironton 500 Watt Halogen Worklight can be used in various work settings. It’s useful for painting, plumbing, and all types of repair jobs. This portable halogen lamp has a heavy-duty tubular steel stand making it very stable. The 45° up-down swivel allows you to shine light anywhere you need it. An extra halogen bulb is included.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Specific Operation Warnings ⚠WARNING Electric shock hazard. Do not use with an extension cord near water or where water may accumulate. Do not use in wet or damp areas. Electric shock hazard. Do not use while standing on wet or damp areas. Keep lamp at least 16 feet (5m) from pools and spas. Keep plugs and receptacles dry. Use only on GFCI-protected circuits. Do not submerge the light in water. The light is not waterproof. Use extreme caution in any wet location. Burn Hazard.
receptacle installed by a qualified electrician. CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you are not sure the tool is properly grounded. Grounded Tools: Tools with 3-Prong Plugs Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. The plug must be connected to a properly grounded outlet.
overheating. Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or wet areas. Grounded tools require a 3-wire extension cord. Double Insulated tools can use either a 2- or 3wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
Loosen the screws and nuts on both back sides and glass. Insert the light bulb (8) into the bulb socket (6). Slide the bracket (13) over the lower grip (11), lining the hole in the bracket up with the bolt hole in the grip.
Insert the knob (4) through the concave washer and into the hole. Swivel the head to the desired angel, and secure with the knob (4). Close the lamp cover (10) and secure with bolts and nuts. Before Each Use ⚠WARNING Always check damaged or worn out parts before using the work light.
work light operation. Operating Instructions ⚠WARNING Electric shock hazard. Do not use with an extension cord near water or where water may accumulate. Do not use in wet or damp areas. Electric shock hazard. Do not use while standing on wet or damp areas. Keep lamp at least 16 feet (5m) from pools and spas. Keep plugs and receptacles dry. Use only on GFCI-protected circuits. Do not submerge the light in water. The light is not waterproof. Use extreme caution in any wet location.
Connect to the AC power. After Each Use ⚠WARNING Unplug and allow to cool before replacing bulb. Bulb gets HOT quickly! Only contact On/Off Button/Plug when turning on. Do not touch hot lens, guard, or enclosure. Do not remain close to the light if skin feels warm. Do not look directly at lighted lamp. Oil from skin will drastically shorten the life span of the bulb if not cleaned with rubbing alcohol and allowed to dry before use.
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule. TO PREVENT SERIOUS INJURY FROM LIGHT FAILURE: Do not use damaged equipment. If damage is noted, have the problem corrected before further use. Maintenance Interval Maintenance Point Inspect the general condition of the light.
tester. If bad, replace the bulb. Press RESET button on GFCI outlet (not all models). Wrong system setting.
Parts List Part 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Description Power Cord Lower Grip Switch Box Knob Wire Cover Bulb Socket Handle Light Bulb Reflector Lamp Cover Plug Bolt Fasten Bracket Quantity 1 1 1 1 1 1 1 1 1 1 2 2 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.