Product Manual

Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty.
Do not operate product if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the product.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
11.
12.
Page 4
ASSEMBLY
Use Nut (1) and Spring Washer (2) to 1.
fasten a Caster (3) to each of the Rod
Assemblies (4), the Outer Body Axle
Assembly (9) and the Inner Body Axle
Assembly (10). See the Parts Dia-
gram on Page 7 for reference.
Slide each Roller (8) over each Rod 2.
Assembly. See the Parts Diagram on
on Page 7 for reference.
Repeat Step 3, on with the Inner 4.
Body Axle Assembly (10), making
sure all connections are tightened
firmly.
Remove Lock Nut (5) and Bolt (6) 3.
from each Rod Assembly. Slide
Roller (8) and Washer (7) onto Rod
Assembly. Slide Rod Assembly into
square tube on Outer Body Axle As-
sembly (9). Fasten together using
Lock Nut and Bolt, making sure all
connections are tightened firmly.
When unpacking,check to make sure all parts listed on Page 7 are included.