0FT. X 10FT. STRAIGHT LEG CANOPY OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Model: ______________ Purchase Date: ____________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This canopy is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
IMPORTANT SAFETY CONSIDERATIONS CANOPY USE AND CARE WARNING: To avoid personal injury fully read and understand the following instructions before each use. Do not modify the canopy in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the canopy was designed. Always check of damaged or worn out parts before using the canopy. Broken parts will affect the canopy operation.
STEP 2: Pull and extend the frame A) Select a smooth, level site for your canopy. B) With two people on diagonal corners of the structure, each grab a leg and have one person stand in place while the other walks the frame out. Slide the roof lock mechanisms located on each leg, up toward roof corners, two legs at a time; at each leg, listen for lock to “click” into place. Stop adjusting frame legs at mid-level (half-way mark) for the next step.
STEP 5: Stake canopy A) Stake canopy by driving stakes through the holes at the foot of each leg. The fabric canopy top also has integrated guy ropes that can be staked as well. B) Use additional weights (sand bags, other heavy objects) on each foot or place legs twelve inches down into sand to help secure set up for beach use. Stakes alone will not secure canopy in sand or soft soil. DISASSEMBLY Store all poles and stakes in their corresponding bags to prevent possible tearing or damage to fabric.
MAINTENANCE • Maintain your canopy. It is recommended that the general condition of any canopy be examined before it is used. Keep your canopy in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. • Store idle canopy. When canopy is not in use, store it inside, and in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
DIAGRAM AND PARTS LIST CTOP-1010106G FPTY-1010106G CBAG-1010106G SSET-1010106G Part# Description Qty. Part# Description Qty. CTOP-1010106G Canopy top 1 FPTY-1010106G Frame 1 CBAG-1010106G Carry bag 1 SSET-1010106G Stake 8 For replacement parts and technical questions, please call 1-800-222-5381.
Limited Warranty Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of six months from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Governing Law This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or consequential damages, so the above limitations may not apply to You. This limited warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law.
