Product Manual

Page 9 of 13
Operating Instructions
⚠WARNING
 Do not exceed the rated load capacity of 1000 lb.
Place the load on the platform cart and move it by pushing the handle with both hands.
After Each Use
Store the cart in a clean, dry area. Clean the cart with a damp cloth.
Maintenance
Maintain the cart by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures. It is recommended that the general condition of any tool be
examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil
and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
After the first 20 operating hours
Tighten loose bolts.
Clean the casters and platform.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Casters do not
roll smoothly.
Bolts are loose.
Check all the bolts and fasten if
needed.
Casters’ inner bearings are dirty or
rusted
Apply oil to inner bearings if needed.