/8 HP Mini Air Mover Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 1/8 HP Mini Air Mover is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operating Warnings .......................
Intended Use Ironton’s 1/8 HP Mini Air Mover is intended to move air to dry floors, walls, furniture, and a variety of other areas. It’s durable and easy to operate with an effective balance of static pressure and airflow. Technical Specifications Model Volt / Frequency Power Amp Rated Airflow (on High) RPM (Low/Medium/High) Speeds Item #52724 115 Volts / 60 Hz 1/8 HP 1.5 Amps 500 CFM 650/950/1200 3 Speeds Important Safety Information ⚠WARNING Read and understand all instructions.
allow children to handle the air mover. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the air mover. Do not use the air mover while you are tired or under the influence of drugs, alcohol, or medication.
Do not force the air mover. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the air mover will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the air mover with a damaged part. Do not use an air mover with a malfunctioning switch.
plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician. CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you are not sure the tool is properly grounded.
Assembly Instructions IRONTON’s #52724 Air Mover is shipped ready-to-use. Prior to plugging the unit into the power source, completely inspect it for any shipping damage. Before Each Use ⚠WARNING Always inspect power cords for damage before operating. All air movers in operation must be supervised at all times. Operating Instructions 1. Plug the electrical cord into the power outlet.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Air mover is not running. Possible Cause Corrective Action No power input. Plug in the air mover. Check the circuit breaker. Switch is not turned on. Turn the switch to “on”. Air mover fan has a wheel jammed. Remove any material jamming the fan wheel. Intake or exhaust is blocked.
Reference 14 15 16 Part Name Fan Right Housing Grid Cover (Fan Side) Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
