Slim Power Inverter, Cup Power Inverter, or Power Strip Owner’s Manual Item #53062 120W Slim Inverter Item #53066 120W Cup Inverter Item #53075 100W Power Strip WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This inverter is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 5 Specific Operation Warnings .......................
Intended Use The Ironton inverter is a high-performance solution for using household power while on the road. Connected to the 12 volt output power source, the inverter efficiently and reliably supplies 115V/60Hz AC power for a wide variety of loads like laptops, microwaves, and cellular phones with power consumption under the rated watts. With proper care and appropriate use, the inverter will give you years of dependable service in your car, truck, or RV.
#53075 Property Efficiency (Maximum) Ambient Operating Temperature Range #53075 Specification 85% 32° F to 104° F #53062 Property AC Power Output AC Power Voltage Maximum AC Output Power Maximum AC Output Surge Power AC Output Frequency AC Output Waveform USB Power Output DC Output Voltage DC Power Specification DC Input Voltage Range Battery Drain Without AC Load Low Battery Shut-Down Point (Nominal) High Battery Shut-Down Point (Nominal) Fuse Efficiency (Maximum) Ambient Operating Temperature Range #53
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to other cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended.
majority of automobiles, RVs, and trucks are negatively grounded. This inverter is unable to power appliances or equipment that produce heat, such as hair dryers, microwave ovens, and toasters. Do not open the inverter. There are no user-serviceable parts inside. Do not use this inverter with medical devices. It is not tested for medical applications. Not for use by children. Install and operate the unit only as described in this manual. Do not use in marine applications.
Reference 5 6 Subassembly Adapter Plug Cable with Replaceable Fuse Detachable Water Proof Cup Base Main Parts of #53075 Reference 1 2 3 4 5 6 Subassembly Adapter Plug Cable with Replaceable Fuse LED Indicator— When the inverter has DC input and runs normally, the blue LED indicator will light. When the inverter shuts down because of low or high input voltage, the LED indicator will turn off.
Main Parts of #53062 Reference 1 2 3 4 5 6 Subassembly Adapter Plug Cable with Replaceable Fuse Two-Tone LED Indicator Cooling Fan USB Ports Ventilation Openings AC Sockets Assembly Instructions 1. Make sure the power switch on the inverter is OFF. 2. Connect the red positive (+) end of the ring terminal to the positive (+) terminal of the inverter. 3. Connect the black negative (-) end of the ring terminal to the negative terminal of the inverter. 4.
Before Each Use Before installing the inverter, make sure the location meets the following conditions. This inverter has a mounting bracket. To secure and fasten your inverter, please mount the inverter. Dry Don't drop or pour any liquid on the inverter. Cool Keep the inverter out of direct light. Ventilated Leave at least 2" of clearance around the inverter for air flow. Make sure the ventilation openings are not obstructed.
Recharge the battery before it is discharged to 50%. This will extend the durability and efficiency of the battery. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Problem No power, no Cause Solution Battery is defective. Replace battery. Blown fuse. Check and replace fuse. Loose cable connections.
Measured inverter Standard ‘average-reading’ AC Inverter’s ‘modified sine wave’ output is too low. voltmeter used to measure output output requires ‘true RMS’ voltage, resulting in an apparent voltmeter for accurate reading 5 to 15V too low. measurements. Battery run time is AC product power consumption is Use a larger battery to make up less than expected. higher than rated. for increased power requirement. Battery is old or defective. Replace battery.
When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number. The distributor reserves the rights to make design changes and improvements to product lines and manuals without notice.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
