Product Manual

Page 5 of 13
Cluttered, wet, or dark work areas can result in injury. Using the roller stand in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
 Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the roller stand.
⚠WARNING
PERSONAL SAFETY
 Stay alert, watch what you are doing, and use common sense when operating the roller stand. Do
not use the roller stand while you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating the tool may result in serious personal injury.
 Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
 Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.
 Do not overreach. Keep proper footing and balance at all times.
⚠CAUTION
ROLLER STAND USE AND CARE
 Do not force the roller stand. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the roller stand will operate
properly and perform its intended function. Replace damaged or worn parts immediately. Never
operate the roller stand with a damaged part.
 Store the roller stand when it is not in use. Store it in a dry, secure place out of the reach of
children. Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your roller stand.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
 Do not exceed the rated load capacity.
 Do not stand or climb on stand.
 Only operate with legs fully extended.