000-LB. ENGINE STAND WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS USE AND CARE Do not modify the Engine Stand in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the Engine Stand was designed. Always check of damaged or worn out parts before using the Engine Stand. Broken parts will affect the Engine Stand operation. Replace or repair damaged or worn parts, or missing parts immediately. Store idle.
SAFETY MARKINGS WARNING: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Study, understand, and follow all instructions before operating this device. Do not exceed rated capacity. Use only on hard, level surfaces. Lock mounting plate rotating mechanism before applying a load. Lock the wheels/casters before working on the engine. Rotate the engine using the handle or device provided. Assure load is centered and secured to mounting attachments.
* Do Not Overload Engine Stand Do not overload this Engine Stand beyond its rated capacity. Overloading this Engine Stand beyond its rated capacity can cause damage to or failure of the Engine Stand. * Always Use on Hard Level Surfaces This Engine Stand is designed only for use on hard level surfaces capable of sustaining the load. Use on unstable or other possible loss of load.
ASSEMBLY Use the exploded drawing as your guide to assembly. Lay all parts and assemblies out in front of you before beginning. The following procedure is recommended: All numbers in parenthesis () refer to the index number from the parts breakdown. 1. Familiarize yourself with Engine Stand. 2. Attach the rear casters (11) to the rear leg (10) with washer (12), and pin (13), 3. Attach the rotating casters (18) to the front leg (17) with washer (6), spring washer (7) and nut (8).
4. Attach the cross member (15) to the front leg (17) with bolt (16), washer (6), spring washer (7) and nut (8). 5. Attach the main post (9) and cross member (15) to rear leg (10) with bolt (14) and washer (7). 6. Attach the head plate assembly (2) to the mounting arm (5) with bolt (4), washer (6), spring washer (7) and nut (8).
7. Insert the head plate assembly (2) into the head plate collar of the main post (9). Then line up one fixed position hole on the head plate assembly (2) with the main post stop hole (9), and assemble them by inserting the stop pin (1). 8. Check that all hardware has been tightened before use. 9. Engine Stand is now ready for use. BEFORE USE WARNING: Failure to heed these warnings may result in personal injury, property damage and/or death.
OPERATION 1. Use the stop pin (1) to lock the head plate assembly with the head plate collar. Using an engine hoist, suspend the engine level with the head plate assembly. 2. With the mounting arms (5) loosened, use the correct size engine bolts to attach arms to the engine. (ENGINE BOLTS ARE NOT INCLUDED WITH ENGINE STAND.
3. Make sure the engine is centered and level on the head plate assembly, then tighten the mounting arms to the engine first, and then tighten the mounting arms to the head assembly. 4. .Check and verify that all attaching hardware on the engine, mounting plate assembly and mounting are tight. After engine is secure SLOWLY lower the hoist transferring load to the engine stand.
MAINTENANCE INSTRUCTIONS If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. Inspection You should inspect the product for damage, wear, broken or missing parts (e.g.: pins) and that all components function before each use. Follow lubrication and storage instructions for optimum product performance.
ASSEMBLY DIAGRAM ENGINE BOLTS ARE NOT INCLUDED WITH ENGINE STAND.
PARTS LIST Index # Description Part Number Qty. 01 Stop Pin T23401-1 1 02 Head Plate Assembly T23401D.3 1 03 Handle T23401D-2 1 04 Bolt M12x65 GB5780-86 4 05 Mounting Arm T23401D.1 4 06 Washer 12 GB95-85 8 07 Spring Washer12 GB93-87 9 08 Nut M12 GB41-86 8 09 Main Post T23401D.2 1 10 Rear Leg T23401D.4 1 11 Rear Caster T23401D-1 2 12 Washer14 GB95-85 2 13 Pin 2x22 GB91-86 2 14 Bolt M12x80 GB5780-86 1 15 Cross Member T24541D.
Limited Warranty Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
