50 Ft. String Lights LightLight500W Halogen Work Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This light set is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Ironton 50 Ft. String Lights feature 5 lamp holders with plastic lamp guards spaced 10 feet apart on a single 125V, 15 Amp, 14/3 cord with a grounded plug. The lights provide an even string of bright lighting. Technical Specifications Property String Length Cord Power Supply Max Current Consumption Specification 50 feet 14/3 125 Volt AC 15 Amps Important Safety Information ⚠WARNING Read and understand all instructions.
Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool.
the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING Electrical Shock and Fire Hazard. Do not exceed the marked lamp holder wattage or string maximum wattage including any additional string loads. Do not plug in an additional light or appliance that exceeds 1125 watts. Electric shock hazard.
Use plug cover when not in use. Not for use by or around children. Grounding ⚠WARNING This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PROVIDED PLUG.
Extension Cords ⚠WARNING USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Main Parts of Light Set Reference 1 2 Subassembly 50ft String Light Set Lamp Guards Assembly Instructions ⚠WARNING This light set must be used with the lamp guards installed. Make sure the power is turned off. There is a risk of accidental starting, resulting in serious personal injury. Deviation from the assembly instructions may result in a risk of fire or electric shock. The light string must be supported every 10 feet. Do not use the conductors to support the light set.
Loose hardware, Damaged cord/electrical wiring, Cracked or broken parts, and Any other condition that may affect its safe operation. Operating Instructions ⚠WARNING Electrical Shock and Fire Hazard. Do not exceed the marked lamp holder wattage or string maximum wattage including any additional string loads. Do not plug in an additional light or appliance that exceeds 1125 watts. Electric shock hazard. Do not use with an extension cord near water or where water may accumulate.
Insert the light bulb (not included) into the socket. Close the light guard. After Each Use ⚠WARNING Unplug and allow to cool before replacing bulb. Bulb gets HOT quickly! Only contact On/Off Button/Plug when turning on. Do not touch hot lens, guard, or enclosure. Do not remain close to the light if skin feels warm. Do not look directly at lighted lamp. Do not touch the bulb with bare hands.
Daily before operating Inspect the general condition of the light. Check for: loose hardware, damaged cord/electrical wiring, cracked or broken parts, and any other condition that may affect its safe operation. After each use Allow light set to cool and then wipe external surfaces of the light set with a clean cloth. Troubleshooting ⚠WARNING Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment.
Parts Diagram Parts List Part 1 2 3 4 Part Description Power Cord with Plug, Outlet, and Socket Lamp Guard Hooks (not shown) Carrying Bag (not shown) Quantity 1 5 5 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
