Product Manual

Page 9 of 15
Main Parts of Light Set
Reference
Subassembly
1
50ft String Light Set
2
Lamp Guards
Assembly Instructions
⚠WARNING
 This light set must be used with the lamp guards installed.
 Make sure the power is turned off.
 There is a risk of accidental starting, resulting in serious personal injury. Deviation from the
assembly instructions may result in a risk of fire or electric shock.
 The light string must be supported every 10 feet. Do not use the conductors to support the light
set. Hooks or a steel cable must be used.
 Insert the light bulb in the socket (not included).
 Snap the buttons under the lamp guard and around the socket, and then close the lamp guard.
 Repeat the process to create 5 assembled lights.
Before Each Use
⚠WARNING
 The light string must be supported every 10 feet. Do not use the conductors to support the light
set. Hooks or a steel cable must be used.
 Always check damaged or worn out parts before using the work light. Broken parts will affect the
work light operation.
Inspect the general condition of the light set. Check for: