Operation Manual

122
12 SERVICE
12.1 RESETTING THE PRODUCT
Hold down A, B, C and D simultaneously, all segments will be “on”, then
release the buttons and the product
will be reset.
* After reset, there will not be any measurement of altitude, pressure or
temperature until A, C or E is pressed.
* After reset, entering Compass mode will change to calibration screen
directly.
12.2 BATTERY REPLACEMENT
Replace the exhausted battery with a CR2032 cell or equivalent.
Altimetermode with altitude change: measures every 2,5 seconds
Altimetermode without altitude change (barometer mode): every 2,5
minutes
Barometermode: measures every 2,5 minutes. Changes to Time mode
after 24 hours
Temperature: measures every 2,5 minutes
CE