Operation Manual

ManualsBrandsIrox ManualsAir ConditioningIBR923

DIGITAL WEATHER FORECASTER

WITH HYGROMETER AND

RF CLOCK

MODEL : IBR923 DECO-BAR

USER'S MANUAL

INTRODUCTION

Congratulations on your purchase of the IBR923 Digital Weather

Forecaster with Hygrometer and RF Clock. The IBR923 is an all-in-one

weather forecasting device and clock.

The IBR923, a weather forecasting device, has several weather

related functions. A main feature is that it takes and records

temperatures in more than one location. Using a wireless remote

thermo-sensor, it can simultaneously monitor temperatures in

three remote locations. The unit will show temperature trends and

record maximum and minimum temperature readings.

As part of the weather forecasting function, a built-in barometer that

displays atmospheric pressure. Using graphic illustrations the unit

displays atmospheric pressure trends and displays forecasts as

sunny, partly cloudy, cloudy, and rainy.

The IBR923 is also a Radio Frequency (RF) controlled clock. It can

automatically synchronize its current time and date when it is

brought within an approximate 1500 km radius of the radio signal

generated from Frankfurt, Germany (DCF77).

Included with this unit is a hygrometer. This feature graphically

illustrates the current comfort level, displays the current humidity,

and shows maximum and minimum humidity levels.

Other features include extra-large liquid crystal display (LCD), and

a daily crescendo alarm.

No wire installation is required between the main and remote units

as the IBR923 operates at 433 MHz.

MAIN FEATURES: MAIN UNIT

IBR923os-tech_ENoutput 04/25/2005, 11:332

Summary of content (11 pages)

PAGE 1
EN DIGITAL WEATHER FORECASTER WITH HYGROMETER AND RF CLOCK Included with this unit is a hygrometer. This feature graphically illustrates the current comfort level, displays the current humidity, and shows maximum and minimum humidity levels. MODEL : IBR923 DECO-BAR No wire installation is required between the main and remote units as the IBR923 operates at 433 MHz. Other features include extra-large liquid crystal display (LCD), and a daily crescendo alarm.
PAGE 2
EN A. A5. TIME / DATE / ALARM WINDOW - Displays the current time, date (day, month, and year), or alarm time - Radio Frequency (RF) status indicator [ ] - “ ALARM ON” icon, indicates when the alarm is active [ ] - Alarm indicator [ALARM] - A.M. / P.M. indicator FRONT DISPLAY The extra-large LCD occupies the front panel. The LCD is subdivided into five easy-to-read sections.
PAGE 3
EN B8. UP( ) DOWN( ) BUTTONS Sets the increase or decrease in the value of a setting. MAIN FEATURES: REMOTE SENSOR UNIT C1. BATTERY COMPARTMENT Accommodates four UM-3 or “AA” size batteries A. LED INDICATOR C2. REMOVABLE TABLE STAND For standing the remote unit on flat surface. B. CHANNEL SLIDE SWITCH Flashes when the remote unit transmits a reading Designates the remote unit Channel 1, Channel 2 or Channel 3 C.
PAGE 4
EN D. BATTERY COMPARTMENT BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT Accommodates two UM-4 or AAA-size batteries E. BATTERY DOOR 1. Remove the screws on the battery door. F. WALL-MOUNT HOLE 2. Select the channel number on the CHANNEL slide switch. Supports the remote until in wall-mounting 3. Install 2 alkaline batteries (UM-4 or “ AAA” size 1.5V)strictly according to the polarities shown. G. MOVABLE TABLE STAND For standing the remote unit on a flat surface 4.
PAGE 5
EN When the reception is complete, the RADIO RECEPTION signal will stop blinking. The strength of the reception for the last full hour will be indicated. For better reception, place the clock away from metal objects and electrical appliances to minimize interference. Should you wish to deactivate the RF controlled function, press MODE and DOWN( ) button simultaneously. To reactivate the RF control function, press MODE and UP( simultaneously.
PAGE 6
EN 3. Setting the time HOW TO MANUALLY SET THE CLOCK Press MODE again, the hour settings will flash. Use the UP( ) or DOWN( ) button to enter the hours. Holding down either the up or down position will increase or decrease the value rapidly. 1. Setting the 12hr./24hr. clock display Press MODE and hold for three seconds. The 12-hr value will flash. Use the UP( ) or DOWN( ) buttons to make a selection between a twenty-four hour display and a twelve hour display.
PAGE 7
EN HOW TO SET AND ACTIVATE THE ALARM CHECKING INDOOR AND REMOTE SENSOR TEMPERATURES 1. To set the Alarm Press ALARM button to display the alarm time. Press ALARM and hold for three seconds, the value for the hour setting will flash. The indoor temperature readings, and indoor temperature maximum/minimum indicator are all part of the INDOOR TEMPERATURE window. Press UP( ) or DOWN( alarm hour setting.
PAGE 8
EN NOTE ON SETTING REMOTE SENSOR CHANNELS ATMOSPHERIC PRESSURE The atmospheric pressure indicator, in the weather forecast window, uses arrows to indicate if the atmospheric pressure is increasing, remaining stable, or decreasing. The unit has an auto-scan function that sequentially displays temperature readings of three remote sensors. To activate this function, press and hold the [channel] button for 3 seconds. To deactivate press the [channel] button again.
PAGE 9
EN 3. The weather forecast is solely calculated on the basis of barometric air pressure changes. HOW TO WALL MOUNT OR USE THE TABLE STAND (REMOTE UNIT) 4. The probability of a correct weather forecast is approximately 70% and is valid for an area of approx. 20-30 km around the location of the weather station. The unit can be wall-mounted using its recessed screw holes or place on a flat surface using the table stand. 5. The forecast “Sunny” means at night “cloudless weather”.
PAGE 10
EN HOW TO RESET THE UNIT SPECIFICATIONS Temperature Measurement The RESET slot allows you to return all settings to factory values. Accessing the slot is required only when the unit is not operating in a favorable way such as in the rare case of a malfunction. Main unit Indoor Temperature measurement To reset the unit, place a blunt stylus into the slot and press. MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service.
PAGE 11
EN - Power Main unit EC-DECLARATION OF CONFORMITY : use four (4) UM-3 or “AA” 1.5V alkaline batteries Remote sensing unit This product contains the approved transmitter module TX 01 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: : use two (2) UM-4 or “AAA” 1.5V alkaline battery Efficient use of radio frequency spectrum (Article 3.