Operation Manual

D. BATTERY COMPARTMENT

Accommodates two UM-4 or AAA-size batteries

E. BATTERY DOOR

F. WALL-MOUNT HOLE

Supports the remote until in wall-mounting

G. MOVABLE TABLE STAND

For standing the remote unit on a flat surface

BEFORE YOU BEGIN

For best operation:

1. Insert batteries for the remote unit first. Then proceed with

inserting the batteries for the main unit.

2. Position the remote unit and the main unit within effective

transmission range. In usual circumstances, the effective range is

30 meters.

3. Though the remote unit is weather proof, it should be placed away

form direct sunlight, rain or snow.

BATTERY AND CHANNEL

INSTALLATION: REMOTE UNIT

1. Remove the screws on the battery door.

2. Select the channel number on the CHANNEL slide switch.

3. Install 2 alkaline batteries (UM-4 or “ AAA” size 1.5V)strictly

according to the polarities shown.

4. Replace the battery compartment door and secure its screws.

Note that once a channel is assigned to a remote unit, you can only

change it by removing the batteries or resetting the unit.

BATTERY INSTALLATION: MAIN UNIT

1. Gently lift the tab on the battery compartment door.

2. Insert four UM-3 or “ AA” size alkaline batteries.

3. Replace the battery compartment door.

IBR923os-tech_ENoutput 04/25/2005, 11:335