Operation Manual

3. Recording and reading the Max/Min memory
- 26 -
Please note: The Min/Max Data will only be recorded if the Memory Mode has
been activated (Icon „MEM“ active on the display). All such records will be
deleted when you leave the Memory-Mode
1. Press the MEM button to enter the memory mode and to start the recording
of the Min/Max-Data.
- Press the Min/Max button to read the maximum temperature/humidity
- Press the Min/Max button to read the minimum temperature/humidity
2. To stop the recording and to clear the memory, press the MEM key (Icon
„MEM“ disappears from the display)