Operating instructions

7. Using the Different Weather Modes

Pressure and Weather Forecast Mode

This part of the display indicates the current pressure, sea level pressure, weather fore-

cast, moon phase and pressure trend.

A number of historical statistics can also be viewed, such as the sea-level pressure values

for the last 24 hours, moon phase for the previous and next 39 days, as well as a pressure/

temperature/ humidity history bar-chart.

Pressure values may be displayed inHg, hPa/mBar or mmHg, and altitude values may be

displayed in meters or feet.

- Accessing Pressure and Weather Forecast Mode

From the main console unit: Press UP or DOWN until the weather forecast icon on the up-

perleftofthedisplaystartsashing.

- Setting Pressure Parameters during Initial Start-Up

During the initial start-up of the main console unit, all functions in Pressure and Weather

Forecastmodewillbelockeduntilthepressuresettingsarecongured.

1. Choose Pressure Units:

  Theuniticon“inHg”or“mmHg”or“hPa/mBar”shouldbeashing.PressUP or DOWN

to select pressure unit as inHg, hPa/mBar or mmHg

Press SETtoconrmyourselection.

2. Choose Altitude Units:

Press UP or DOWN to select altitude unit as feet or meters.

Press SETtoconrmyourselection.

3. Set Altitude:

Press UP or DOWN to adjust value. Press and hold either button for fast advance.

Press SETtoconrmyourselection.

4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.

Note: After initial start-up the altitude cannot be adjusted again until the main console unit

is restarted.

- Viewing Pressure and Altitude Data

In Pressure and Weather Forecast Mode, each press of SET rotates display between:

- Sea level pressure

- Local pressure

- Local altitude

- Setting the Sea Level Pressure

1. In Pressure and Weather Forecast Mode, press SET until the sea level pressure is

displayed.

2. Press and hold SET.TheSeaLevelPressuredisplayshouldbeashing.

3. Set Sea Level Pressure:

Press or to adjust value. Press and hold either button for fast advance.

Press SETtoconrmyourselection.

4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.