Operating instructions

Clock and Alarm Mode

Themainconsoleunitcanbeconguredtodisplaythetime,calendarorUTCtime.There

are three time alarms available on the console unit:

Single alarm:activatedonceatspeciedtime

Weekday alarm:activatedeverydayfromMondaytoFridayatspeciedtime

Pre-alarm:activatedatspeciedtimeinterval(Fixed30min)aheadofweekdayalarm,if

channel 1 temperature falling to +2 ºC or below.

The snooze duration for the above alarms can also be programmed (0-15 min).

- Accessing Clock and Alarm Mode

From the main console unit: Press or until the clock icon beside the time/date

displaystartsashing.

- Setting up the Time, Date and Language

1. In Clock and Alarm Mode, press and hold SET to enter clock and calendar setup.

2.Thedayofweekshouldstartashinginthedisplay.

Set Language: Press or to select language for day of week: English, German,

French, Italian, Spanish or Dutch.

Press SETtoconrmyourselection.

3. Select City Code:

Press or to select city code for your local area. Refer to the list at the end of this

manual for available codes. Press SETtoconrmyourselection.

4. (if USR was chosen for city code) Set Minute for Latitude:

You will be asked to enter your latitude in minutes (º).

Press or to adjust value. Press and hold either button for fast advance.

Press SETtoconrmyourselection.Repeataboveproceduretosetsecondsforlatitude,

minutes for longitude and seconds for longitude.

5. (if USR was chosen for city code) Set Time Zone:

Press or to adjust value in resolution of 30 min. Press and hold either button for

fast advance.

Press SETtoconrmyourselection.

6. (if USR was chosen for city code or city is in a DST zone)

Set Daylight Saving Time Option:

Press or to turn DST option on or off. Press and hold either button for fast advance.

Press SETtoconrmyourselection.

7. Repeat the above instructions to set year, month, day, calendar display format (day/

month or month/day), time display format (12 hr/ 24 hr), local hour and local minutes.

8. Upon completion the display will return to normal Clock and Alarm Mode.

Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm

Mode. All settings made will be discarded.