Operating instructions

22
- Rotating Between Temperature and Dew Point Display
In Temperature and Humidity Mode, each press of SET rotates temperature display between:
- Temperature and Relative Humidity
- Dew Point Temperature and Relative Humidity
- Setting Units for Temperature Display (ºC or ºF)
In Temperature and Humidity Mode, press and hold SET to convert units between degrees
Celsius ºC and degrees Fahrenheit ºF.
- Activating/Deactivating the Temperature Alerts
1. In Temperature and Humidity Mode, each press of ALARM rotates channel temperature
display between:
- Current Temperature for corresponding channel
- Upper Temperature Alert (displays OFF if deactivated):
icon displayed
- Lower Temperature Alert (displays OFF if deactivated): icon displayed
2. When the above alerts are displayed, pressing or will activate/deactivate the cor
responding alert.
- Setting up the Temperature Alerts
1. In Temperature and Humidity Mode, press ALARM to select alarm which you wish to
  congure.
2. Press and hold ALARM until channel temperature and or iconstartsashingin 
the display.
3. Set Value for Temperature Alert:
Press or to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
4. Upon completion the display will be returned to the temperature alert selection screen.
- Disabling when Temperature Alarms are activated
To Disable Temperature Alarm(s): Press ALARM to disable the alarm (s).
- Viewing the Max/Min Channel Temperature and Humidity
In Temperature and Humidity Mode, each press of MEMORY rotates channel temperature
and humidity display between:
- Current temperature and humidity at remote sensor
- Minimum temperature and humidity at remote sensor
- Maximum temperature and humidity at remote sensor
- Resetting the Max/Min Channel Temperature and Humidity Memory
In Temperature and Humidity Mode, press and hold MEMORY to clear memory for all
channels.