Operating instructions

24
Rain Mode
The main console unit records the total amount of rainfall for the last hour, last 24 hours,
yesterday, last week and last month. The rainfall may be displayed in mm or inches.
A daily rainfall alert function is available which can be programmed to sound if the daily
rainfallexceedsapre-conguredlimit.
- Accessing Rain Mode
From the main console unit:
Press
or until the RAIN icon onthedisplaystartsashing.
- Viewing Rain Statistics
In Rain Mode, each press of SET or MEMORY rotates display between different rain statis-
tics:
- Last hour
- Last 24 hour
- Yesterday
- Last week
- Last month
Tip: For an estimation of the rain rate, the Last Hour rainfall value can be understood as
“inch/hr” or “mm/hr”.
- Resetting the Rainfall Statistics Memory
In Rain Mode, press and hold MEMORY to reset all rainfall statistics.
- Setting Units for Rain Display (inch or mm)
In Rain Mode, press and hold SET to convert units between mm and inches.
- Activating/Deactivating the Daily Rainfall Alert
1. In Rain Mode, each press of ALARM rotates display between the current rainfall statistics
and the daily rainfall alert (“ALARM HI” will be displayed).
If the alert is deactivated, “OFF” will be shown; otherwise the rainfall alert value is shown.
2. When the rainfall alert is displayed, pressing
or will activate/deactivate it.
- Setting up the Daily Rainfall Alert
1. In Rain Mode, press ALARM to display rainfall alert.
2. Press and hold ALARMuntilrainfallalertand“ALARMHI”startsashinginthedisplay.
3. Set Value for Rainfall Alert:
Press or to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
4. Upon completion the display will be returned to the rainfall alert display.
- Disabling when Daily Rainfall Alert is Activated
To Disable Rainfall Alert: Press ALARM to disable the alert.