Operating instructions

Wind Mode

The wind direction is shown by an animated compass display. Its angle can be displayed

as compass points (i.e. NW) or in bearings from the north (i.e. 22.5º).

The upper left of the wind display can be set to indicate the temperature at the anemom-

eter or the temperature adjusted with a wind chill factor.

The lower left of the wind display indicates the average wind speed for the last 10 minutes,

as well as gust, wind speed alert and gust alert information. It can also show records of the

maximum values of wind speed and gust attained for the current day.

The wind speed and gust alert functions can be programmed to sound if the wind speed or

gustexceedsapre-conguredlimit.Thewindspeedmaybedisplayedinkm/h,mph,m/s

or knots.

Note: The wind speed alert has a 5 mph hysteresis and the wind gust speed alert has a

7 mph hysteresis. The hysteresis is to prevent the alerts from sounding constantly due to

smalluctuationsnearthealertvalue.Thismeansthatafterthewindspeedreachesthe

alert value, it will have to fall below the alert value plus the hysteresis to deactivate the

alert.

- Accessing Wind Mode

From the main console unit:

Press

or until the WIND icon onthedisplaystartsashing.

- ConguringWindDisplay

In Wind Mode, each press of SET rotates display between:

- Temperature with wind chill, wind direction in bearings

- Temperature with wind chill, wind direction in compass points

- Temperature at anemometer, wind direction in compass points

- Temperature at anemometer, wind direction in bearings

Note: The windchill temperature display will be in °C only.

- Setting Units for Wind Speed Display (km/h, mph, m/s or knots)

In Wind Mode, press and hold SET to convert wind speed units between km/h, mph, m/s or

knots.

- Viewing Wind Statistics

In Wind Mode, each press of MEMORY rotates wind speed display between:

- Current wind speed

- Daily maximum wind speed (“DAILY MAX” is displayed)

- Gust speed (“GUST” is displayed)

- Daily maximum gust speed (“GUST DAILY MAX” is displayed)

- Resetting the Wind Statistics Memory

In Wind Mode, press and hold MEMORY to reset all wind statistics.