Operating instructions

28
9. Troubleshooting
“The display shows dashes “---” for weather parameter(s)”
The display will show “---” when the wireless link is lost with the remote sensor for the
following periods:
Thermo-hygro Sensor – 15 minutes
UV Sensor – 30 minutes
Anemometer (Wind Sensor) – 15 minutes
Rain Sensor – 30 minutes
Check or replace the batteries for the corresponding sensor. Then press and hold to
enforce a search for all remote signals.
If the above does not solve the problem, check the wireless transmission path from the
corresponding sensor to the main console unit and change their locations if necessary.
Although wireless signals can pass through solid objects and walls, the sensor should
ideally be within the line of sight of the console unit.
The following may be the cause of reception problems:
- Distance between remote sensor and main console unit too long. (Maximum transmission
distance in open area conditions is 100m)
- Signal shielding materials such as metal surfaces, concrete walls or dense vegetation in
the path of transmission.
- Interferences from wireless devices (such as cordless phones, radio headsets, baby
listening devices) and electronic appliances.
“TheweatherreadingsdonotcorrelatewithmeasurementsfromTV,radioorofcial
weather reports.”
Weather data can vary considerably due to different environmental conditions and place-
ment of weather sensors.
Check the placement tips included in this manual to site your sensors in the best possible
way.
“The weather forecast is inaccurate.”
Theweatherforecastisapredictionofweatherafter12-24hours,andmaynotreectcur-
rent weather conditions.