Operation Manual

7
To set time
1. Hold down D until the hour digits start to flash on the display, which indicates the setting screen.
2. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed.
3. Press C to advance to the next setting as in the following:
* When second digits are flashing, press A or B to reset the digits to 00. Resetting seconds when the digits are
between 00 to 29 will leave the minute digits unchanged, or between 30 to 59 will increase the minute digits
by one.
* When 12 or 24 is flashing, press A or B to switch between 12- or 24-hour formats. If 12-hour format is chosen,
AM or PM indicator will be shown.
4. Press D to exit the setting screen and day of the week will be adjusted automatically.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to Time mode
automatically.
5.COMPASS MODE
Use C to enter Compass mode.
* Mode prompt “COMP” is displayed first and bearings will be taken automatically.
- Compass mode indicator is shown.
- When you take bearings, readings are shown in 16 cardinal indications together with bearing in degrees.
* Reading shown indicates the direction that the LCD’s 12 o’clock position is pointing to.
- North-South arrow is shown on circumference of the LCD.
* North is indicated by 1 flag and South is indicated by 3 flags.
- Declination correction is provided.
* Declination is the difference between true north and magnetic north.
HOUR MINUTE
SECOND YEAR
MONTH DAY 12/24H
C C C
C C C C