Treadmill Instruction Manual ............................................................. 01 Treadmill parameters ................................ 02 Safety precautions ............................................................. 03 Sports suggestion ..................................................... 04 Product Brief ................................................ 05 ............................................................
Product brief: Left and right rear foot running belt strake speed time distance calories motor cover power cord and switch strake Attention: .It’s common home use machine,please avoid commercial use. .Please avoid using machine at fire source commercial use. .please exercise in wide space without any danger. .when use in the floor,please be sure cover the carpet to avoid damage to the surface. .Please dont’t use this machine on the uneven places. .
Packing list number name unit Q’TY 1 treadmill pcs 1 pcs 1 screw package Screwpackage name number 5# wrench 01 remote control Q’TY number name oil 1 03 1 manual 04 Q’TY 1 1 Parameters: Model P100 Voltage AC220V/50HZ Max use’s weight 100KG Packing Size 1370*530*115mm Running Area 1100*400mm Speed 1--6km/h Thank you very much for purchasing this product ,to be able to use the product,be sure to read this manual.
Safety precautions .Please don’t use machine with illness,fatigue and drunk. .Children should use this machine under adults accompany. .Please wear confortable clothes,avoid flip flop or skirt when using this machine. .Please start from suitable sport as excessive exercise may affect health. .Loading capacity 100KG,overload may cause damage.
Sports suggestins and guidelines 5 to 10 minutes of warm-up before each use of the machine.It is not allowed to shield during exercise,usually ,when preparing to restore,inhale by nose and exhale by mouth.The breath and action should be cordinated.If the breath is short,stop the exercise immediately. Muscle exercise in the same parts should be rest for 48 hours,that is ,we can train the same parts erery other day.
Assembly instrucions The machine ha been installed in the manufactuir and can be used after power on.Take the machine out of the box and put it on the floor.Make sure there is a space of 50cm in front and back. The machine moves As shown in the picture,you can move back and front by lifting the tail of the machine properlywith both hands.It is only suitable for short-distance movement in the room.
Operation guide M - + ON OFF Remote control 1、 Window display it will display “3”and”1”. When the machine is running ,the display window “speed window“and “time window” will be automatically switched every 5 seconds.The indicator light under the calorie window changes with the window display.The information displayed in different windows is as follows. (1).”speed”window” The current speed value is displayed in the running state,and the speed light is on.The display range is 1.0--6.0km/h. (2).
4.Operation in the process of movement : (1).Press the “speed -”key to reduce the running speed of the machine. (2).Press the “speed +”key to inctrase the running speed of the machine. (3).Press the “start stop”key and the machine will slow sown to stop. M key: In backward mode, open the machine power switch and press M key to select the time. Distance. In press - you can select backtrace 5.Each numerical display range: set parameters initial Setting value Time (min:sec) 0:00 10:00 1.
TreadmillCommonErrorMessagesPromptDescrip on 01:communica onblockedbetweenElectronicandcontroller. olu on S When communica on line is blocked Please between communica online Electronic and under connect again or change controller WhenElectronicwithoutsignal ChangeElectronictorepair Whenundercontrollerwithoutsignal Changeundercontrollertorepair E02:Thecontrollerdoesnotdetec hevoltageo hemotorline.
Runningbeltadjustmentmethod 1 . Whenrunningbeltleantothele ,adjus ngscrewonthele 1-2turnsalongthe clockwise.Then,testrunning;Ifs llleantothele ,repea heabovestepsun l backtothecenter. 2. Whenrunningbeltleantotheright,adjus ngscrewontheright1-2turnsalong theclockwise.Then,testrunning;Ifs llleantotheright,repea heabovesteps un lbacktothecenter. ance.Pleaseadjust 3.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.