Use Instructions

+
ON
OFF
M
-
Remote control
Operation guide
1、 Window display
6
it will display “3”and”1”.
When the machine is running ,the display window “speed window“and “time window”
will be automatically switched every 5 seconds.The indicator light under the calorie window
changes with the window display.The information displayed in different windows is as follows.
（1）.”speed”window”
The current speed value is displayed in the running state,and the speed light is on.The
display range is 1.0--6.0km/h.
（2).”time”window”
Diasplay the movement time.The timeis on. The forward timing is from 0:00-60:00,60
minutes,and the machine is flat stable deceleration stops operation,countdown decreases
from the set time to zero,when the countdown reaches 0:00.The machine will enter the
standy state 10 minutes after it stops running smoothly and stably.
(3).”distance”window
Display the movement distance ,distance equal bright forward count overflows from
0.00-99.00 and then counts again,reverse count decrease from the set value to zero,when
the counter is turned to 0,the machine will drop steadily until it stops running 10ninutes
to standy.
(4）.”calories window”
The caloric consumption value is displayed,When the caloric consumption value is displayed
on the caloric lamp,it overflows from 0.0-99:00 in the positive counting then count again.
when counting in reverse direction ,count back from the set value to 0.When counting back
to 0,the machine is stable drop stop running quickly,and enter standby mode 10 minutes
after complete stop.
2.Remote control funtion
（1）.”Start stop “is the start/stop key:when the power is on, press this key at any time to
start the line.During the movement ,you can stop the operation of the machine by pressing
this key.
（2）open ”+”is the speed increase key,after machine is started,increase the speed,
and its adjusrment range is km/time.
speed “-”is the speed decrease key,after the machine is started,increase reduce the speed,
and the state’s adjustmengt range is 1 km/time.
（3）“switching calculation”is to check the speed time distance and calorie display.
According to the operation of another machine,the second white switch is used to switch
the display port once,and then move (manual mode )to turn on the power switch.
3.Quick start
(1）.Open the power switch.
(2).Press”start/stop”button,the machine enters the 3seconds countdown,the buzzer makes a
sound and the window is built at the same time.display the countdown number.After the
countdown of 3 seconds,the machine starts to run at 1.0km.
(3)After the start-up,you can use the “speed +”and “speed -”keys to adjust the speed of
machineas required.