User's Manual

ISAW WiFi Remote Controller
User Manual
(V.1.00)
1. Name of each part
1. LED Lamp
2. LCD Screen
3. Mode / RC Power button
4. Camera select button
5. Shutter / Camera off button
6. USB slot
2. General operations
Function
Button
Description
RC Power on / off MODE (Long)
Press 'MODE' button for 2 seconds
Remote controller will be turned on / off.
* When there is no button operation with RC for 5 mins, the RC
will goes to 'power save' mode.
Change camera mode MODE
Press 'MODE' button.
Connected camera will change to selected mode (video / photo)
Select individual
camera
CAMERA
Press 'CAMERA' button.
Remote controller will select each connected camera to operate.
Select camera group CAMERA (Long)
Press 'CAMERA' button for 2 seconds.
Remote controller will control all connected camera as a group.
Recording SHUTTER
Press 'SHUTTER' button.
Video recording / Photo shoot
Camera power off SHUTTER (Long)
Press 'SHUTTER' button for 2 seconds.
Remote controller will turn off power of selected camera.
Connect the camera
MODE +
SHUTTER
Press 2 buttons together for 2 seconds.
Remote controller activates to connect to the camera
Disconnect the camera
MODE +
CAMERA
Press 2 buttons together for 2 seconds.
Remote controller will disconnect from selected camera
3. USB operation
Status
Operation
RC Power off
Li-ion battery recharging
RC Power on
Ready for firmware upgrade
4. How to connect WiFi (Pairing)
Steps
Image
Description
Step#1.
Camera WiFi
on
Camera
operation
Activate WiFi in the camera. Select 'RC' in WiFi option.
Wait 1min until WiFi signal is activated in the camera.