Instructions

C!GE.211!wpmubhf!dbmjcsbujpo!;
1,Connect the FD-100 and PC with a scLinker
2,Please make sure the battery is within allowed range rst,then
measure the battery’s real voltage and take a note.
3,Use the “FD-100 linker.exe” to ll in the real voltage(measured on
step 1),and then click “Calibration(F8)” botton.When the back-
ground color turns green,the caliration was successful.
* You could use ISDT BG-8S/BC-8S/Smart Charge to measure the battery’s real volt-
age. Please make sure the balance port was connected when you use a smart char-
ger.Or you could also use a multimeter to measure the voltage.
* In order to ensure proper functioning of FD-100,please repower after calibration.
JTEU!tdMjolfs
QD!Pqfsbujpo!Hvjef!