Q8 500W SMART CHARGER Instruction Manual
Thanks for purchasing the ISDT Q8 Smart Charger. Please visit: www.isdt.co for more details on the functions of this smart charger, as well as purchase various accessories. Functions of products will be kept on upgrading, the manual in your hand may be different from the actual operation, please refer to the actual functions. Warnings and Safety Tips For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
Port / Buttons USB connection Power input Display Screen Touch board Power output Fan Vent Dimension:80×80×33mm Weight:170g Balance port
Product Specifications Max. input current:20A Charging current:0.1~20A Input voltage:DC 10~34V Discharging current:0.1~1.5A Output voltage:DC 1~34V Max. charging power:500W Balance current:1.5A/Cell Max Max. discharging power:15W Abnormal voltage alarm:Support Supported battery types and cell count: LiFe,LiIon,LiPo 1~8S ; LiHv 1~7S ; Pb 1~12S ; NiMH/Cd 1~16S Preset Battery Type of Charger and Task Parameters NiCd/MH Pb LiFe Lilon LiPo LiHv Rated voltage 1.20V 2.00V 3.20V 3.60V 3.70V 3.
How to Confirm Charging Current Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in over heat even explosion during the charging process. The charging and discharging capacity of battery is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery.
Charge Balancing port is strongly recommended when charging lipo battery, which can make sure to monitor voltage on each cell battery and balance it when charging. Warning beeper will yell before start charging lipo if in non-balance mode(no connecting with balance port). Current setting range: 0.1~20A The battery type, cell count and charging current are auto set accordingly when connecting with BattGo battery. Discharge Current setting range: 0.1~1.
Destroy Connect the battery to be scrapped, and select the scrap function in task options, which capable to discharge the battery to 0V. Current setting range: 0.1~1.5A The battery type and cell count are are auto set accordingly when connecting with BattGo battery. Task Battery Battery and cell count Current Charge/Discharge/Storage/DC power supply/Destroy LiHv、LiPo、LiIon、LiFe、Pb、NiMh/Cd LiFe,LiIon,LiPo(1~8S),LiHv (1~7S), Pb(1~12S),NiMH/Cd(1~16S) 0.
Q8 02:34:45 85% 20.5 A 9999 mAh LiPo 8S Voltage Charging 4.15V 4.15V 4.15V 4.15V 4.15V 4.15V 4.15V 4.15V ISDT LiPo 6S 99999mAh 5.0C / 35.0C 2019-01-23 3 123 BattGo information Cells IR 23.3mΩ 23.3mΩ 23.3mΩ 3.3mΩ 23.3mΩ 231mΩ 23.3mΩ 23.3mΩ cell internal resistance System info Cell voltage 23.5V / 500W 22.5V / 400W 60°C / 130°F 23 / 109pcs 20.
Min. input voltage protection 10~30V: all tasks in operation will be stopped at once and hint warning of low voltage, when the input voltage is lower than the input voltage as set up. It will protect the battery from being discharged when using battery pack as power supply. Max. input power setting 30~550W: if the input power is smaller than the max working power(550W), please set up the parameter as the actual output power as max input, to protect the input power and enable the charger to work stable.