P10 User Manual

Charge
Balancing port is strongly recommended when charging lipo battery, which can make
sure to monitor voltage on each cell battery and balance it when charging. Warning
beeper will yell before start charging lipo if in non-balance mode(no connecting with
balance port). Current setting range: 0.2~10.0A. The battery type, cell count and
charging current are auto set accordingly when connecting with BattGo battery.
Charging Screen
In operation status, Press arrow keys will shift to different manu pages.
As it’s arranged as : voltage of each cell, IR of each cell, BattGo information,
SmartPower information, working parameters. The cell voltage and internal resistance
will only be displayed under balanced charging mode.
The BattGo information is displayed only when the BattGo battery is connected,
and the voltage of each cell can also be displayed without connecting the balance port.
Power on P10 smart charger, connect the battery, and short touch the middle key of
the touch board to enter the task setting menu as follows:
Operating the Charger
Task
Battery
Battery and
cell count
Current
Charge
LiHv、LiPo、LiIon、LiFe、Pb、NiMh/Cd
LiFe,LiIon,LiPo,LiHv（1~6S）；Pb（1~10S）；
NiMH/Cd（1~16S）
0.2~10.0A