P10 User Manual

BattGo
When the corresponding interface (CH1 output, CH2 output) is connected to the
BattGo battery, you can check and modify the relevant parameters of the BattGo
battery through this item.
Volume
There are four options for volume setting: high, medium, low and off.
When set to "Off", the operation prompt sound will be turned off,
but the error prompt sound will not be turned off.
Automatic split screen
The automatic split screen setting has three options of 60 seconds, 30 seconds and
off. You can choose to switch from the single-channel parameter interface to the
dual-channel (split screen) parameter interface automatically within the set time.
You can also select "Off" to turn off the automatic split screen function.
System self-test
After removing all battery connections of CH1 and CH2, select this item to perform
system self-test operation.
Calibration
The input voltage, output voltage and balance voltage of the charger can be
calibrated with this task.
*All product photos, statements and literature are for reference only. For up-to-date information,
please visit our official web www.isdt.co
SHENZHEN ISD TECHNOLOGY CO. LTD
ISDT reserves the right of final explanation and revision for the terms.