AC100W / DC250W 智能充电器 用户手册 AC IN 100-240V SMART CHARGER DC IN 10-30V AC 100W DC 250W BATTERY Task System 2S 6S
感谢您购买ISDT D1智能平衡充电器。 欢迎您登陆艾斯特官方网站www.isdt.
接口 / 按键 AC IN 100-240V SMART CHARGER DC IN 10-30V 显示屏 上翻键 AC 100W DC 250W Task System 菜单键 AC 输入口 下翻键 BATTERY 2S 电池 输出口 升级 接口 DC 输入口 6S 风扇 散热口 平衡口 充电器预设电池类型及任务参数 支持 串数 最大充 电电流 0.90V 1~16S 10.0A 1.90V 1~12S 10.0A 3.30V 2.90V 1-6S 10.0A 4.10V 3.70V 3.20V 1-6S 10.0A 3.70V 4.20V 3.80V 3.30V 1-6S 10.0A 3.80V 4.35V 3.85V 3.40V 1-6S 10.0A 额定 电压 满充 电压 NiCd/MH 1.20V 1.40V Pb 2.00V 2.40V LiFe 3.20V 3.65V Lilon 3.
如何确定充电电流 在充电前必须先了解清楚所用电池允许的最大充电电流,使用过大的电流对电池充电会对电池的寿命造成影响甚至损坏,过大的电流 也会造成充电过程中电池发热甚至爆炸。电池充放电能力一般以C数来标识,充电C数乘以电池容量就是电池所支持的最大充电电流, 例如1000mAh的电池,标识充电能力是5C,那么最大充电电流为:1000*5=5000mA=5A,也就是最大支持5A充电。 对于锂电池而言,如果无法确定电池充电C数,为了安全起见请将充电电流设定在不大于1C的值。 充电C数与充电时间的参考关系:充电时间≧60分钟/充电C数(例如使用1C充电,充电完成时间大约需要60~70分钟), 由于电池转换能效的差异,此时间有可能会有所延长。 任务设定 将D1与电源连接上电,连接好电池,短按中间按键进入任务设定菜单,菜单项如下: 任务 充电,放电,存储,销毁电池,直流电源 电池类型 LiHv、LiPo、LiIon、LiFe、Pb、NiMh/Cd 电池串数 LiFe,LiIon,LiPo,LiHv (1-6S) ; Pb (1-12S) ; NiMH/Cd (1-16S) 电流设置 0.1~10.
工作参数显示 工作中可以通过按键切换屏幕下半部分的信息显示内容,信息内容依次为:各电芯电压、各电芯内阻、BattGo信息、工作参数。 其中电芯电压及内阻仅在平衡充电模式下才会显示。 连接BattGo电池才会显示BattGo信息,且不用连接平衡口也可以显示各电芯电压。存储电流根据BattGo信息自动设定。 系统设定 待机界面下,长按中间按键弹出系统设定菜单,菜单项如下: 最低输入电压限制 当使用电池作为输入电源时,此项设定可以保护电池不会过放。 当充电器检测到输入电压低于设定值,将立即停止所有在执行的任务并提示输入电压过低。 最大输入功率限制 当连接的输入电源达不到充电器的最大工作功率要求时,为了保护输入电源及使充电器稳定工作,需要根据电源的实际输出能力 设定此参数。 蜂鸣器音量 当设定为OFF时,将屏蔽操作声提示,但不屏蔽错误提示音。 自检 选择该项时可以进行手动自检操作。 校准 该项可以校准充电器的输入电压,输出电压和平衡口电压。 *本产品所有图片、声明及文字资料仅供参考,实际信息请参考官方网站 www.isdt.
AC100W / DC250W SMART CHARGER USER GUIDE AC IN 100-240V SMART CHARGER DC IN 10-30V AC 100W DC 250W BATTERY Task System 2S 6S
Thanks for purchasing the ISDT D1 Smart Charger. Please visit: www.isdt.co for more details on the functions of this smart charger, as well as purchase various accessories. Functions of products will be kept on upgrading, the manual in your hand may be different from the actual operation, please refer to the actual functions. Warnings and Safety Tips For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
Port / Buttons AC IN 100-240V SMART CHARGER DC IN 10-30V Display screen Up button AC 100W DC 250W Task System Menu button Down button BATTERY Power output 2S AC Power input DC Power input 6S Upgrade Balance port port Fan vent Preset Battery Type of Charger and Task Parameters Rated Full Charge Voltage Voltage Storage Voltage Discharge Balance Unbalanced Voltage Charge Charge Supported Cell Count Max. Charging Current NiCd/MH 1.20V 1.40V 0.90V 1~16S 10.0A Pb 2.00V 2.40V 1.
How to Confirm Charging Current Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in over heat even explosion during the charging process. The charging and discharging capacity of battery is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery.
DC Power supply The charger can be used as a DC power supply when choosing this function, with adjustable voltage 2~30V, and current 0.2~5.0A. The battery type, parameter and current are not optional in this task. Storage Current setting range: 0.1~10.0A The battery type, cell count and storage current are auto set accordingly when connecting with BattGo battery.