Discharger User Manual

System Setting Menu

DC Power supply

The charger can be used as a DC power supply when choosing this function, with adjustable voltage 2~30V,

and current 0.2~5.0A. The battery type, parameter and current are not optional in this task.

Storage

Current setting range: 0.1~10.0A

The battery type, cell count and storage current are auto set accordingly when connecting with BattGo battery.

Charging Screen

Press the middle button to switch the information displayed in the lower half of the screen, as cell voltage, cell internal resistance,

BattGo information, working parameter. The cell voltage and internal resistance only on display in balancing charging mode.

The BattGo information will display only when connected to the BattGo battery, and the cell voltage is able to display without

connected to the balance port.

Under the standby interface, Long press the middle button to enter the system setting menu:

Min. input voltage protection: All tasks in operation will be stopped at once and hint warning of low voltage, when the input

voltage is lower than the input voltage as set up. It will protect the battery from being discharged when using battery pack

as power supply.

Max. input power setting: If the input power is smaller than the max working power, please set up the parameter as the actual

output power as max input, to protect the input power and enable the charger to work stable.

Buzzer volume: The operation sound will be shielded when the volume is oﬀ, except the warning error beep.

Self-test: Enter system setting, select self-test task

Calibration: The input voltage, output voltage and balance voltage of the charger can be calibrated with this task.

*All product photos, statements and literature are for reference only. For up-to-date information, please visit our oﬃcial web www.isdt.co

SHENZHEN ISD TECHNOLOGY CO. LTD

ISDT reserves the right of ﬁnal explanation and revision for the terms.

402D1000000