K1 Dual Port Smart Charger Instruction Manual

Preset Battery Type of Charger and Task Parameters
NiCd/MH
Pb
LiFe
Lilon
LiPo
LiHv
ULiHv
Rated
Voltage
1.20V
2.00V
3.20V
3.60V
3.70V
3.80V
3.90V
Full Charge
Voltage
1.40V
2.40V
3.65V
4.10V
4.20V
4.35V
4.45V
Balance
Charge
Unbalanced
Charge
Supported
Cell Count
1~16S
1~10S
1~6S
1~6S
1~6S
1~6S
1~6S
Max. Charging
Current
10.0A
10.0A
10.0A
10.0A
10.0A
10.0A
10.0A
Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage
your battery, which will result in over heat even explosion during the charging process.The charging and discharging capacity of battery
is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported
by the battery. For example, for a 1000mAh battery with a charging capacity of 5C, the maximum charging current would be 1000×5=
5000mA; therefore, the maximum charging current is 5A. For a lithium battery, if it is impossible to confirm the supported charging C
value, please set the charging current below 1C, for the sake of its (lithium battery) safety. The reference relation between C value and
charging time: charging time ≥60 minutes/ charging C value (e.g. it needs around 60~70 minutes to complete charging with 1C).
Due to differences in battery conversion efficiency, the time to complete the charging might be extended.
How to Confirm Charging Current
Power on K1 smart charger, connect the battery, and short press the middle button to enter the task setting menu as follows:
Operating the Charger
Task
Battery
Battery and cell count
Current
Charge
LiFe, LiIon, LiPo, LiHv, ULiHv, Pb, NiMh/Cd
LiFe, LiIon, LiPo, LiHv, ULiHv (1~6S); Pb (1~10S); NiMH/Cd (1~16S)
0.2~10.0A